Results 1 to 4 of 4
Threaded View
-
04-29-2015, 10:11 AM #3
- Join Date
- Feb 2015
- Location
- Flagstaff, AZ
- Posts
- 73
Thanks AbuMaia, Glad to here that I am not alone in keeping the temp high for more than just the first layer. I'll be trying another print today at the lower temp. I have calibrated the e steps (or went through the process, and it was spot on so I did not make any changes) But have not gone any further to tune extrusion rates. I need to buy a dial caliper but don't want to spend the money on it. lol
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion