Results 11 to 16 of 16
Thread: Replacing Hexagon with E3Dv6
-
04-28-2015, 09:14 AM #11
- Join Date
- Jan 2015
- Posts
- 68
-
04-28-2015, 09:40 AM #12
i used the regular hexagon plate with a washer like the ones that came with the hobbed bolt as a shim between the hotend and extrduer block..worked perfectly too.
OR
You can go this route...I modified Clough42 Itty Bitty Single Extruder to work with the E3d V6 3mm and the stock Hexagon Plate.
http://www.thingiverse.com/thing:714547
-
04-28-2015, 09:56 AM #13
- Join Date
- Jan 2015
- Posts
- 68
-
05-04-2015, 09:29 AM #14
- Join Date
- Jan 2015
- Posts
- 68
Just an update for anyone who is interested. The e3d installed perfectly into the stock extruder from makerfarm. I did end up using the new mounting plate that I ordered at the same time as the hot end.
-
06-02-2015, 11:35 PM #15
- Join Date
- Feb 2015
- Posts
- 371
I don't know how I missed this, but the ABL foot from 42 is too short! Anyone got an STL that will work with the ED3, it is longer than the hexagon.
-
06-03-2015, 06:03 AM #16
- Join Date
- Nov 2014
- Posts
- 138
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help