Results 1 to 10 of 16
Thread: Replacing Hexagon with E3Dv6
Threaded View
-
04-27-2015, 02:22 PM #2
- Join Date
- Nov 2014
- Posts
- 138
All I did was replace the the hexagon with e3d v6. The same mount worked great. Also open up what ever firmware you flashed to the board and change the number one to 5 for the thermistor in configuration.h. Here is the guide for everything. http://wiki.e3d-online.com/wiki/E3D-v6_Assembly
Marlin
Reconfigure your firmware for the Semitec 104GT2 thermistor: In configuration.h:
#define TEMP_SENSOR_0 5
The Metal grove on the e3d v6 area might be bigger but still fits nice and tight. On the Metal plate and Greg.Last edited by rhonal89; 04-27-2015 at 04:01 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help