Results 1 to 9 of 9
Threaded View
-
04-21-2015, 05:31 AM #8
Try to isolate the servo wires away from the motor wires. What brand servo did you use? I chose to go with a higher brand servo (hitec) for that reason. I feel the better servos have higher quality shielding. On my rambo board im using Pin 22
Last edited by voodoo28; 04-21-2015 at 07:32 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion