Results 1 to 10 of 102
Thread: Itty Bitty Double FLEX Extruder
Threaded View
-
04-06-2015, 08:23 PM #11
- Join Date
- Mar 2015
- Location
- Palo Alto
- Posts
- 63
Based on the link at the bottom of the itty bitty flex page on his site I would say this one:
https://github.com/clough42/Marlin/t...3v_double_flex or if you prefer the direct link to the zip: https://github.com/clough42/Marlin/a...ouble_flex.zip
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion