Results 1 to 4 of 4
Thread: Bowden oiption for E3D V6
-
04-03-2015, 11:13 AM #1
- Join Date
- Feb 2014
- Location
- Tyler, TX
- Posts
- 18
Bowden oiption for E3D V6
I have an E3D V6 without Bowden option. Now when I look to find an extruder to hook it up to I keep running into information about the Bowden option/tube. I briefly looked on the web and see lots of topics including Bowden, but nothing that really helps me understand what it is, what it does, why it's needed and where I can get one for my E3D V6.
Any guidance appreciated.
-
04-05-2015, 10:51 PM #2
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
-
04-05-2015, 10:52 PM #3
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
BTW I recommend you avoid a Bowden setup. direct is simpler, and generally prints better
-
04-06-2015, 12:14 PM #4
- Join Date
- Feb 2014
- Location
- Tyler, TX
- Posts
- 18
Found this thanks to your link... Now I get what it is and you are correct, I don't need it.
http://start3dprinting.com/2013/07/w...wden-extruder/
Thanks again.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion