Results 1 to 2 of 2
Thread: nozzles different heights
-
03-30-2015, 10:59 AM #1
- Join Date
- Dec 2014
- Posts
- 61
nozzles different heights
On Creator - My left nozzle is lower then my right. From factory - never changed. If right nozzle correct left gouges?
How do I adjust?
Follow up - Problem was easely solved by removing two screws holding extruder to carriage and inserting a paper washer on the low nozzle below the aluminum bar.. To get thickness of washer level plate so low nozzle just touching plate. Determine the height of high nozzle (mine was two thicknesses of paper).Last edited by sasabs; 03-31-2015 at 10:07 AM.
-
03-30-2015, 01:42 PM #2
Your're answer is here:
http://3dprintboard.com/showthread.p...-across-prints
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help