Close



Results 1 to 4 of 4
  1. #1
    Engineer-in-Training
    Join Date
    Jun 2014
    Posts
    349

    GeeTech printers

    Any experience with acrylic frames, or with GeeTech printers, like this?...

    http://www.geeetech.com/specialpage/.../me_ducer.html

    Also, how hard would it be to change to a metal head?

  2. #2
    Senior Engineer
    Join Date
    Jun 2014
    Location
    Burnley, UK
    Posts
    1,662
    I have had some dealings with Geeetech and their support sucks as do their products. Search on the forum for them, there will be lots of hits, much the same with Google really.

  3. #3
    I have found their "forum" to be all but useless. They must approve your post before it can be viewed so if you say anything negative about the printer itself they deny it. Also, it seems there is only one tech moderating the so called forum and he mostly tells you to send him pictures, and follows up wit telling you it your problem.

  4. #4
    Senior Engineer
    Join Date
    Jun 2014
    Location
    Burnley, UK
    Posts
    1,662
    They don't always delete them.

    http://www.geeetech.com/forum/viewto...15852&start=10

    That was my attempt for the Azteeg that didn't work. I was getting stressed towards the end.

    The forum achieved nothing, I ended up opening a case on ebay, that made them send another one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •