Results 1 to 10 of 43
Threaded View
-
03-24-2015, 10:29 AM #40
- Join Date
- Mar 2015
- Posts
- 4
One thing we're testing out now is a 1/8" thick garolite plate as our build tray, so far ninja semi-flex, pla, Delren all stick with no tape, glue or hair spray, just by laying the plate down and leveling, it's good to go. You can get a 12"x12" sheet for $14.80us and cut into two build trays.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion