Results 1 to 3 of 3
Thread: Adding LED's
Threaded View
-
03-23-2015, 04:36 PM #1
- Join Date
- Mar 2015
- Posts
- 8
Adding LED's
I have a CTC 3D printer which I believe as a mighty board mb. There is a "RGB-LED 24v only" connection point on the mb which as nothing connected to it. F/w is sailfish v7.7.
If I connect some led's to the mb will they work?
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion