Results 1 to 3 of 3
-
03-12-2015, 11:51 AM #1
Revolutionary new type of wood filament for 3D printing
Good day!
Me and my friend decided to create our own type of wood filament for 3D printing and to try our luck with this project on a crowd-founding site (Indiegogo).
We started this project last year in September and after almost 6 months of work and tests, came to a break through. We were able to create a wood filament that contained AT LEAST 50% wood in it, depending on the type of wood we used. The current market filaments have only up to 40% (but usually all have less then that). So you are thinking what is 10% more? Well its not just 10% more. We created our own Bio-polymer mixture to combine with the wood, which does give the filament better durability and properties. And the product is 100% biodegradable and recyclable and with this 100% environmentally friendly. For more about the product you can look at it on indiegogo Link --->http://igg.me/at/hnr/x/9031621 or https://www.indiegogo.com/projects/w...nting-filament
And with this we would like to ask for help spreading the word about it, and if possible help us achieve our goals.
Thank you all for your time, have a great day!
Rok
Last edited by Rokc; 03-12-2015 at 12:04 PM.
-
03-12-2015, 11:56 AM #2
-
03-12-2015, 12:05 PM #3
THANK YOU for the info =) for some reason it did not add "s" at the end of "http" it should work now
https://www.indiegogo.com/projects/w...nting-filament
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion