Results 1 to 4 of 4
-
03-10-2015, 09:24 AM #1
- Join Date
- Mar 2015
- Posts
- 2
MKS BASE V1.1 Firmware Requests Please
I have an Aurora3d Prusa i3 using a MKS Base v1.1 atmega board. I have tried repetier and I can get pretty much everything to work. The only issue is the extruder motor wont run. I have verified that the motor does work by plugging it into a different controller port.
anyone have the original firmware please?
Here is the printer
http://www.amazon.com/Aurora3D-Print...XT47Y26BGFTEDT
-
04-09-2015, 06:44 PM #2
- Join Date
- Apr 2015
- Posts
- 1
easy...
http://reprap.org/wiki/MKS_BASE
-
05-16-2015, 07:18 AM #3
- Join Date
- May 2015
- Posts
- 1
-
05-24-2015, 05:23 PM #4
- Join Date
- May 2015
- Location
- Redmond
- Posts
- 1
Same problem here. Was about to try Marlin
Submitted request to Aurora (no reply) even called Aurora support number (no voice mailbox, no answer) in China (big surprise-not). Was going to try Marlin FW so could add auto-bed-leveler but don't want to break/disable my printer in the process... Anybody have a working FW for the Aurora Prusa i3? (MKS_BASE_V1.1 Controller)?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help