Results 1 to 3 of 3
Thread: Weird End G-code Question
-
03-07-2015, 01:14 PM #1
- Join Date
- Nov 2014
- Posts
- 61
Weird End G-code Question
I just updated to the latest version of marlin to get ready for auto bed leveling eventually. As of now im testing to make sure the new updates are working accordingly. Just printed a test cube which came out great. At the end of the print it homed the X and Y axis like normal, but during this routine it was extruding filament at a really fast rate. Is this normal for the newer visions of marlin? I have not touched my end G-code settings in slic3r.
-
03-07-2015, 01:49 PM #2
- Join Date
- Nov 2014
- Posts
- 522
nope never had that happen to me, and i keep it up to date at least bi weekly
-
03-11-2015, 11:04 AM #3
- Join Date
- Nov 2014
- Posts
- 61
OK so I found the solution to this problem is anyone is interested... I was using 3 different G code files saved onto my SD card to test out the new firmware I had installed. When I stuck my SD card into my computer to add more G code files for testing an error message came up saying my SD card was corrupt. It ran a quick scan and fixed the SD card and now my prints are ending fine.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help