Results 1 to 10 of 17
Threaded View
-
03-05-2015, 04:56 PM #8
- Join Date
- Jul 2014
- Posts
- 83
I tried to export the gcode that cura puts out and open it in replicatorg. It didn't work very well...
It appears that the start/end code is presented as text in the profile for the current project. I was thinking of building a profile with replicatorg/flashforge gcode in place of the cura stock code, to see if that would work.
I usually print over the usb port, so not having .x3g files wouldn't bother me, if cura could output a gcode file that would print on the ff pro...
Cheers,
John
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)