Results 1 to 10 of 12
Thread: Just cant seem to get it right!!
-
02-01-2015, 01:10 PM #1
- Join Date
- Jan 2015
- Posts
- 67
Just cant seem to get it right!!
Ive tried over and over again to fix this model in Microsoft model repair, tried changing some stuff around in sketcup with the model itself. Tried slicing with slicr and cura, I keep getting the same problem, dont know what Im doing wrong. And it just this model, everything else works great, just this one giving me problems, so Im asking some of the pro's here do you see anything obvious that could be wrong that Im missing?Quad_26650_V3_(1).obj
-
02-01-2015, 01:52 PM #2
Can you upload the .skp file the .obj appears to be forked.
-
02-01-2015, 02:22 PM #3
- Join Date
- Jan 2015
- Posts
- 67
It wont let me attach the skp file, let me see is I can figure out how to get it on here
-
02-01-2015, 02:28 PM #4
Just change the .skp to .stl or any other acceptable extension. and upload ill download and change it back to .skp.
-
02-01-2015, 02:35 PM #5
- Join Date
- Jan 2015
- Posts
- 67
how would I change it to a stl? Sketchup wont let me export it in stl
-
02-01-2015, 02:40 PM #6
- Join Date
- Jan 2015
- Posts
- 67
Ok try this, this is the skp file in my dropbox
https://www.dropbox.com/s/i0qj9h0roy...%20V3.skp?dl=0
-
02-01-2015, 03:01 PM #7
-
02-01-2015, 03:08 PM #8
- Join Date
- Jan 2015
- Posts
- 67
Ok now you got to tell me how you did it lol, It looks great in CURA
-
02-01-2015, 03:15 PM #9
No sketchup with the solids inspector2 extension.
-
02-01-2015, 03:19 PM #10
- Join Date
- Jan 2015
- Posts
- 67
inspector2 extension?
Cura slicer issue
09-13-2024, 02:44 AM in 3D Printing Slicer Discussion