Results 1 to 3 of 3
-
01-22-2015, 09:03 AM #1
- Join Date
- Jan 2015
- Posts
- 19
Is there a way to print one item at a time when several on plate
I was watching a video about Ultimaker and it allowed for printing each object completely when several are on a build plate. Might lessen warping. Anyway to do that with a replicator 2?
-
01-31-2015, 08:31 AM #2
- Join Date
- Dec 2014
- Posts
- 8
That sounds like it could end in disaster if you were not very careful with part heights.
-
01-31-2015, 02:12 PM #3
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
It depends also on the physical head of your machine, the gantry dimension and the maximum height one printer could do print-one-at-time can do without entering collision to another part.
The width, and depth also play their role, the slicer would determine which parts to print first .
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion