Results 1 to 10 of 11
Thread: Taulman Bridge - great results
Threaded View
-
01-27-2015, 12:56 PM #4
- Join Date
- Sep 2014
- Posts
- 19
Hi, hope you can help. im using Bridge Nylon, but I cant get the layer stick ok (very bad delamination) , I started with 235 up to 245 degrees , layer at .25 and 60 mm speed, Im using low infill (5 up to 20%) any suggestions? thanks
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion