Results 1 to 7 of 7
Thread: 12" heatbed relay issues
Threaded View
-
01-16-2015, 11:39 AM #4
- Join Date
- Aug 2014
- Posts
- 24
Assuming the relay is still working, why don't you remove both wires from the top connector and solder them together. The relay will still be able to open/close the second connector which will still connect or break the circuit for the heatbed as needed. I think this actually recommended on another thread on here.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion