3D-printed Firearms

[curious aardvark]

okay - now depending on what you want to write about. ie: the impact of 3d printed plastic guns in the usa - very little.
OR the impact of 3d printed guns in the wider world - potentially much greater.

Start with the fact that we're currently talking 99% of the manufacture of pistols. A pistol has no other purpose than to shoot other people.
It's of no use in hunting, it's 'usefullness' lies in the fact that it's easily concealable and instantly recognisable by anyone it's pointed at.

Once you disregard those who just want to make their own gun, and have no criminal purpose in mind, the main purpose for making your own gun is to avoid traceability.
Most guns can be traced either through serial numbers or the marks the barrel and firing pin leaves on both the bullet and cartridge.
It is pretty easy to make your own gun out of bits of everyday hardware, but most people don't think like that - fortunately.
So an untraceable gun made from plastic that can only really be fired a couple of times, is going to be mainly of interest to those who wish to shoot another person and get away with it.

Now in the states, this is a great idea. You can buy ammunition in most hardware stores and not require any kind of licence or identification.
Elsewhere in the world this is not necessarily the case.
In the uk you need to have a firearms licence and show it when buying rifle ammunition. Even shotgun shells can only be bought by someone with a shotgun licence.
Pistols are just banned. Only the people who target shot them cared when they were banned. Everybody else didn't need one or want one.

So making your own gun in the uk is pretty pointless. You can't buy ammunition for it legally and reliable ammunition is harder to make from scratch than the gun.
And if you already know where to buy illegal ammunition then you probably also know where to get an illegal firearm and won't need to print one anyway.
It is also illegal to print a firearm in the uk. If you are a criminal and have access to illegal ammunition then a cheap, untraceable and disposable gun becomes an attractive proposition. So again, while some of us might like to print the thing as an exercise in printing - nobody really cares that we can't, without risking prosecution.
I've thought about it - but why bother, I wouldn't be able to shoot it, and I could lose my printer and face criminal prosecution as a consequence.
I actually do have a current project to do the cad design for a pin fire cartridge for an old shotgun. But that's for someone who has all the licences you could wish for and is a serious historical gun collector.
Once I've got the design right, I'll print a couple sample palstic cartridges and we'll see about getting them made through a metal printing bureau.

Now back in the states where guns are treated as toys and fun for all the family. There are different considerations.
Psychologically the american views guns from an entirely different angle than the majority of the rest of the world.
You can legally buy and own a handgun in many states, so why not be able to make your own ?
And we're back to traceability. That and the simple fact that an all plastic gun is likely to literally blow up in your face.
Which is why any sensible design would include a metal barrel, even a simple tube from the hardware shop can be made suitable with the right modifications - which I'm not going to go into, for obvious reasons.

However if you leave home printers and instead enter the world of metal 3d printing. You've got a whole new set of considerations.
A metal powder deposition laser sintering printer, can not only make a fully metal gun, but one every bit as durable and practical as a conventional factory produce firearm.
And that's where you're going to have to see some new legislation.
The potential for someone to start making quality metal guns - untraceable by current methods - cheaply and with very little knowlege required other than how to use the printer, has numerous implications.

At the moment people are tightly focussed on plastic guns that are inaccurate and likely to break during use. But with metal printing getting cheaper and more widespread, that's where the future problems are going to occur.
Homemade ammunition - metal cartridge cases - can be printed to tight specification in a metal printer. And even in the uk you can still buy the materials to make both gunpowder and nitrocellulose (the original smokeless powder) without any problems.

So forget homemade plastic guns - they're a dangerous gimmick at best - but industrially printed metal guns - they will become a reality in the next few years and one that will be much harder to stop.
Gun running simply won't be necessary. Stick a couple of printers in a shed and start making the guns in the country you want to sell them in.

Want to be an arms dealer ?
spend $20,000 on a metal printer and start printing your own. The cheap plastic machine can be used for stocks and any non-metal parts.
The designs for kalashnikoff rifles are about as widespread and simplified as a gun's design can be and shouldn't pose any problems to even the cheapest metal printer.
Likewise all modern firearms currently exist as cad designs. So even that aspect is already covered.

Just bear in mind that the states is totally untypical on a global scale.
Pretty much the rest of the world treats guns as a tool, not as a toy or an indelible part of their national identity.
Americans often mistakenly believe that guns are rare in the uk. Not so, you just need a reason to own one, and then you need a licence. But if you want one, you can have one - you just need to want it for a reason, and be able to prove that reason.
The vast majority of the population don't need one and don't want one.
And that 'don't want one' approach is what generally confuses the average american.
Brits don't want a gun because they don't need a gun.
Very few americans can understand that. And very few brits can understand why americans want guns they don't need.
That and the english language are the two biggest differences between our two peoples.

Criminals can only really own illegal guns in the uk. And that's been the case for a fairly long time. And they're not easy to get hold of. While I could easily make my own gun, I have absolutely no idea how you go about obtaining one illegally.
Metal printed guns could change that, I don't see it happening in the uk. We're just not a gun oriented culture, even our criminals don't immediately gravitate towards them.
But once something has been proved doable - someone will always do it.

In the states the advent of quality and untraceable metal printed guns could have a definite impact. Particularly when you realise that you're not limited to simple pistols. But can print almost the whole gamut of man portable firearms.
And that's the scary future of cheap metal printers.

Anyway, I hope that's given you a couple of different angles to use in your dissertation.
It's interesting that until I started typing this I hadn't considered metal printers and guns. But now, well that's quite possibly the future of firearms manufacture anyway - legally and illegally.

[old man emu]

What Curious Aardvark said, but for every UK, read Australia.

And the media hype about 3D printed guns is just that, hype. Actually it's ill-informed, grab-at-a-straw, unresearched bunkum. Just like every light airplane that is involved in a flying incident is a Cessna, not matter what the truth might be.

A dissertation, essay, or whatever about the 3D Printing of guns is best suited for submission as an English Literature work of fiction. You'll get better grades and your work will make more sense.

Old Man Emu

[Feign]

I agree with a majority of your post, but there's one part that you might be confused about.

Just bear in mind that the states is totally untypical on a global scale.
Pretty much the rest of the world treats guns as a tool, not as a toy or an indelible part of their national identity.
Americans often mistakenly believe that guns are rare in the uk. Not so, you just need a reason to own one, and then you need a licence. But if you want one, you can have one - you just need to want it for a reason, and be able to prove that reason.
The vast majority of the population don't need one and don't want one.
And that 'don't want one' approach is what generally confuses the average american.
Brits don't want a gun because they don't need a gun.
Very few americans can understand that. And very few brits can understand why americans want guns they don't need.
That and the english language are the two biggest differences between our two peoples.

Only the absolute bottom of the IQ scale in the US would ever consider an actual gun to be a toy, and the ones who do wouldn't likely be able to legally buy a handgun (or even carry one they already own) in over half the states. While several rural families do teach their children to hunt at a fairly young age, they teach responsibility along with it.
Second, there are only a few states where buying and carrying a pistol is a largely unregulated process, judging the entire country on them is like making an opinion on the entire EU based on Amsterdam's drug policies. For the rest of the country, buying a handgun requires a background check and licence almost as difficult to obtain as one in the UK with the important exception that America recognizes self defense as a reason for carrying a gun.
That's the big difference between the US and other places with regards to firearms, is that the use of a firearm (or in the UK even a knife) in self-defense is kind of an unfathomable concept to most non-Americans.

[Mjolinor]

I agree with a majority of your post, but there's one part that you might be confused about.

Only the absolute bottom of the IQ scale in the US would ever consider an actual gun to be a toy, and the ones who do wouldn't likely be able to legally buy a handgun (or even carry one they already own) in over half the states. While several rural families do teach their children to hunt at a fairly young age, they teach responsibility along with it.
Second, there are only a few states where buying and carrying a pistol is a largely unregulated process, judging the entire country on them is like making an opinion on the entire EU based on Amsterdam's drug policies. For the rest of the country, buying a handgun requires a background check and licence almost as difficult to obtain as one in the UK with the important exception that America recognizes self defense as a reason for carrying a gun.
That's the big difference between the US and other places with regards to firearms, is that the use of a firearm (or in the UK even a knife) in self-defense is kind of an unfathomable concept to most non-Americans.

You can't buy a handgun in the UK. There are a few special exemptions but generally they are not allowed. Even the Olympic shooting team have to practise offshore as they are not legal in the UK at all. Anyone that actually owns one has to keep it at a special location, normally in lockup at UK airports and they can only be taken out of there with special license when they are going abroad. The main exceptions of owning one is if you are a licensed slaughter person.There are other exceptions like gamekeepers or dangerous animal breeders, all few and far between.

[Feign]

Maybe I should reword that, "a licence almost as difficult to obtain as a firearm's license in the UK" Getting a pistol in the majority of the states is about as difficult as getting a rifle in the UK.

[Mjolinor]

It's all a bit stupid really. Prohibiting them only means that the only people with them are criminals and if anything they are now more easily obtained illegally than they were before the ban.

[curious aardvark]

Feign - you're an american - so psychologically you're probably not psychologically capable of seeing this from anyone else's point of view. The simple fact that you believe carrying a hand gun for 'self defence' is a valid reason to own one - means you can never understand the point of view of someone who says: 'self defence against what ?, Oh yeah someone else carrying a gun.' Without seeing the absolute irony of the statement.

Like i said I'm not having a go at americans. It's just that most of you have a completely different relationship to firearms than brits and many other nationalities.
To US you treat guns like toys.

While several rural families do teach their children to hunt at a fairly young age, they teach responsibility along with it.

You ever met kids ? forget what you teach them, kids and handguns should never mix.

Anyway this isn't a thread about the morality of firearms. The usa and most everyone else see them in vastly different ways. Accept that and move on.

I was just trying to give the guy writing the dissertation a couple of different approaches to the subject :-)

[nicanor76]

A) Dissertation is also for some bachelor and master degrees, not just PHD. Depending on the college, it's often called a thesis; but some do distinguish the two terminology as different. B) None of what you said are not sources of what he was originally asking, he cannot source what some guy "dropped alot of info" on a forum.

I dont have an issue. If you read my reply, I just dropped alot of info for him to use.

Are you upset because I used the word ignorant? Look up it's actual meaning, its not a "bad word" or an insult. Hence my IMMEDIATE example of saying me writing about a mechanical engineering issue would be from a place of ignorance. OP said he's working on a dissertation, not some simple paper. Those are worlds apart. Dissertations are typically written for your PhD. If dude is actually writing a dissertation, but doesn't know the 1st thing about either of the topics... he's not on the right track.

If that got you upset, you need to re-calibrate your dander meter.

[3dspider]

Considering you can make a "zip gun" with a piece of metal pipe and something to smack the firing pin on the bullet, I don't think a plastic gun is really going to be all that attractive in the long run, especially with the fact that the bullets get quite hot when they fire and you risk melting your newly printed gun (or having the barrel explode in your face). Right now people are interested in it, just because it's a novel idea, not because it is at all practical.

[PrintedPlasticPewPew]

Why does someone climb a mountain? To see if they can achieve their goal. Why do some people make their own furniture when you can just go out and buy it from a manufacturer? Just like building said furniture, shooting at a range is a hobby that a lot of people really enjoy taking part in.

I believe some in this forum have already submitted the fact that just buying a 3d printer and plugging it into an outlet, doesn't mean one can produce a firearm. 3D printers take a lot of effort to get right. I am part of many many 3D groups across many many forums, and I almost daily read someone stating, "I am about to throw this POS in the trash!" or, "Anyone want to buy this printer, I can't get it to work, I've had it!". These are highly technical devices that need to be constructed (in most instances). Lets then talk about self teaching CAD software...yeah, give it a shot if you've never touched any of the multitude of available program options on the market. Now, using almost as many options to find a slicing software which involves setting wall thickness, initial layer height, print speed, infill patterns, infill %, support options, and hundreds of more setting one must experiment with in order to make even some of the most basic files a full fledged "hold in your hand" item. Temperatures, filaments, etc. The list goes on and on.

In the event someone makes a fully plastic gun, they might have trouble making a firing pin out of plastic, and surely a tough time making ammunition from plastic. I wouldn't want to fire a plastic, .04mm walled casing full of explosive powder! If I had criminal intent (which I absolutely do not), I would not waste the time learning all that was necessary to create a weapon. I would go to the local sporting good store and buy a bat. I, for one find it fascinating and challenging. With this technology, someone may develop something that enables our troops, farmers, engineers, or doctors prevail in the future.

I agree with 3Dspider: Right now people are interested in it, just because it's a novel idea, not because it is at all practical.

Our forefathers carved out pieces of wood to house the metal components in the construction of firearms, yet people still have trees in their yard.