Results 1 to 10 of 119
Threaded View
-
12-25-2014, 11:45 PM #37
- Join Date
- Dec 2014
- Posts
- 32
2 things:
1. Getting holes the right size if that is important in the design. I almost always end up with 2 prints. 1 to measure how much the hole will close up on this part and another with the correct hole sizes.
2. Getting my part broken up into peices that are printable without overhang issues.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help