Results 1 to 7 of 7
Threaded View
-
12-20-2014, 09:05 AM #2
stuck for choice with kits.
Delta's look easiest to build and most fun to watch :-) Plenty of kits for around the £350-400 mark.
Personally I'd make sure you had an sdcard reader and lcd screen.
That way the printer doesn't need to be tethered to a pc.
Heated plate - not essential, can be useful but in atoss up between heated plate and screen/card reader the heated plate would lose, by a large margin.
Last time I used my heated plate was simply because it was 12c in my workshop, put the plate on 30c just to get the pla to stick a wee bit better.
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help