Results 1 to 10 of 44
Threaded View
-
11-26-2014, 01:59 PM #8
CPC Connector Shroud With Threads
This is a size 11 CPC connector shroud with printed 5/8-24 threads. The threads are exactly as printed. The black bits in the threads is residue from the black plastic connector it was screwed onto.
- MakerFarm 8" Prusa i3v
- All of my upgrade parts (http://www.thingiverse.com/clough42/...inter-upgrades)
- Itty Bitty Belted Extruder
- Hexagon 3mm/.4mm hot end
- Marlin firmware
- Slic3r 1.1.7 stable
- .2mm layer height
- MakerFarm ABS
2014-11-26 12.51.12.jpg
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)