Results 1 to 3 of 3
Thread: How to install guide tubes
-
11-20-2014, 11:58 AM #1
- Join Date
- Sep 2014
- Posts
- 16
How to install guide tubes
Is there some sort of trick that I'm missing about putting the long black guide tubes into the top of the extruder holes? They seem to be bigger than the holes. Am I suppose to crimp them or something?
-
11-21-2014, 02:03 AM #2Hex3D - 3D Printing and Design http://www.hex3d.com
-
11-24-2014, 01:00 PM #3
- Join Date
- Nov 2014
- Location
- Boise, ID
- Posts
- 5
Haven't used guide tubes on my original Replicator since forever. Hang the spools above and let it feed straight down. Much less hassle.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion