Results 1 to 10 of 10
Threaded View
-
11-22-2014, 07:44 AM #5
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
We have a thread going on that stuff geoff on another forum. Some guys have tried it. Its made by smooth-on. It is basically just a clear brush on epoxy. Its not some special wonder coating that makes you part look like a sheet of glass or anything like that. It takes multiple coats to fill layer marks then to get the glassy smooth look you sand it and put on another coat. I know you paint all your parts so you would be far better off putting on a few heavy coats of primer, sanding that then painting your usual way. Primer will always sand and build up way better than epoxy
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help