Results 1 to 10 of 16
Thread: 12" i3v for first printer
Threaded View
-
11-17-2014, 10:00 AM #10
Just so you know, the frame material isn't the usual Baltic birch plywood. It's really something like veneered MDF or other hardboard material. The MDF/hardboard should be more stable than the usual plywood, and the laser cutting process leaves behind a glazed surface on the cut edges. I'm not trying to imply you shouldn't seal or paint the veneer - just trying to give you a heads up on what you'll be seeing when you open the box from MakerFarm.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion