Results 1 to 5 of 5
Threaded View
-
11-15-2014, 04:58 PM #3
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
It's 60x15mm, the label says 14v DC 0.15A. Neither Mouser nor DigiKey have 14v DC fans. I'm hoping a 12v 0.12A or a 12v 0.16A will work though. The higher-amp one pushes a bit more air than the other.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion