Results 1 to 10 of 11
Thread: Hairspray Won't Hold
Threaded View
-
11-13-2014, 09:58 PM #2
This might sound a bit twee, but perhaps you have hairspray build-up. The fresh applications cannot stick to the earlier layers. As a first step, try washing your print bed with water and use a razor blade in a safety holder to scrape the glass clean. I'd even give acetone a try as a cleaner, too.
Old Man Emu
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help