Results 21 to 21 of 21
-
11-10-2014, 08:09 AM #21
There have been a lot of improvements to Slic3r since 0.9.9 ! I would deviate from MakerFarm's recommendation on that one! I don't think that Cabinet or it's drawers are going to get abused too badly in an office environment. I would try just 1 outside perimeter, with 15% or 20% infill. You will be able to see if that is working before the whole part is printed. If 1 outside perimeter doesn't work, you can bump it up to 2. That would reduce the amount material (and print time) significantly.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery