This kit includes all the components required to build a complete Prusa i3 machine.It is more easy to assemble than the original Prusa i3.

Features:
- Based on RepRap Prusa i3 design
- Easy to assemble than the original Prusa i3
- Smart LCD Control support
- Can print with both PLA and ABS

Technical Specifications :
- Build Volume :
( 214 x 214 x 165) mm
- No. of extruders : 1
- Layer thickness :
0.1 mm - 0.3 mm (This is optimal,but you can go below that)
- XY Positioning precision :
0.0125 mm
- Nozzle Diameter :
0.4mm
- Filament Diameter :
1.75 mm
- Power Supply :
Input 230 V / Output 12V DC 240 W
- Electronics :
PrintrBoard REV D ( 4 Layer Board)
- HotEnd :
J head HotEnd with Catridge heater, 230C MAX Temperature
- HeatBed :
MK2 HeatBed, 110C MAX Temperature
- Printing material :
Both PLA and ABS.
- build Material :
Uses high quality laser cut 6mm acrylic
- Motors : NEMA17 Stepper motors,1.8 step angle (4.4 kg/cm torque)
- Connectivity : USB ,Micro SDCard using LCD Controller
- Kit Weight : 8 kg

You can check out the Printer at http://makemendel.com/3d-printer/prusa-i3-kit

Here is the First Look of the printer

Fotor1105164821.jpg

Looking forward for your views !!