Results 1 to 2 of 2
-
09-29-2014, 09:01 PM #1
Guys, i think i did it! A dual extruder for the i3v!
Now that I've gotten your attention, I seriously do think I lazily constructed a dual extruder mount for the i3v. I haven't tested it myself because I don't own two E3Dv6 Bowdens (I'd like to, though). Here's an STL I made from taking a recently uploaded i3v X-Carriage I found on Thingiverse and an i3 dual-extruder mount intended to be bolted on. I just merged the two together and BAM, an X-Carriage/Dual-Extruder mount, all in one!
If anyone has even a single E3Dv6, could you print this out and give it a test? If there are any errors, I can upload a SCAD file for modifying some stuff.
i3vdualex.stl
-
09-30-2014, 06:58 AM #2
- Join Date
- Jul 2014
- Location
- Eastern Colorado
- Posts
- 536
There seem to be a few parts missing. How are the hotends attached to that extruder? Also, I'd find some way to rotate it so that the hotends are aligned along the Y axis. There's a bit more room in the Y axis for two nozzles than there is in the X.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help