Results 1 to 10 of 26
Threaded View
-
09-26-2014, 01:12 PM #6
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
The filament is broken in the heated part of the head or you are not heating the head up. Do the temperatures read correctly.
From cold using preheat the temperature should start around 20 degrees and climb to 230 or so over about 3 minutes. Do you see that happen?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion