Results 1 to 10 of 757
Threaded View
-
09-24-2014, 08:51 PM #10
I know there have been some additions and changes to the SD Card code. But I don't use the SD Card stuff. It might be worth while to do a diff between the old and new code and see what you can spot. I don't think there have been that many changes so most likely it won't be too hard to spot. If you upload the source to the version that works, I can take a look too.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion