Results 1 to 10 of 10
Threaded View
-
11-26-2013, 02:06 AM #7
- Join Date
- Nov 2013
- Posts
- 8
did you calibrate for the steps your motors are making in your firmware?
so make a testcube van 3x3x3 and see what the dimensions are when the print is done.
if it is not close to these numbers then your problem is that you x or y is not making enough steps.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help