Results 1 to 4 of 4
-
08-02-2014, 07:57 PM #1
- Join Date
- Aug 2014
- Posts
- 4
Delta Printer prints High in front of each axis ?
I have a home built delta printer that prints and is working so so.. but something I just cant figure out.. if printing a circle say, it will print high in front of each axis and low between them. Kinda like image that I thinking posted. What do I need to adjust or what do I need to fix to get this to print a flat circle ?
Thanks.. btw.. first post new to fourm..
Greg
printerissue.JPG
-
08-02-2014, 09:13 PM #2
- Join Date
- May 2014
- Posts
- 100
You're printing concave. You must adjust your delta radius, meaning it is too large.
-
08-02-2014, 10:54 PM #3
- Join Date
- Aug 2014
- Posts
- 4
thank you.. I will be fiddling with tomorrow now that I have an answer..
-
08-03-2014, 07:39 PM #4
Yes, that will help you. I had to change mine by .06 and now its working fine.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery