Results 1 to 10 of 18
Threaded View
-
07-29-2014, 10:04 AM #2
As you can see, the resistance and inductance of these motors is tremendous. I think this is why many of us have had trouble getting the extruder motor to retract properly at high retract rates (25-30mm/s).
If you're struggling with blobbing or stringing on your MakerFarm printer, try reducing your retract rate to 10mm/s. The extruder motor can usually keep up at this rate.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help