Results 1 to 10 of 42
Threaded View
-
06-30-2014, 12:41 PM #4
I think you are worrying too much about the glass. It doesn't scratch that easily and it is very cheap to replace (at least if you use thin picture frame glass). What I do is wedge a single edged razor blade under a corner of the print. And then I wedge a small flat bladed screw driver under the razor blade as close as possible to the print. Usually, with a little bit of a twist to the screw driver, it pops off the glass.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help