Results 1 to 8 of 8
Thread: Ender 3 Neo - Jam Problem
Threaded View
-
05-07-2024, 12:39 PM #6
I 3D Printed this nozzle box
Image2.jpg
Image1.jpg
I found on t https://www.printables.com/model/154769-nozzle-box
This was a fun project an as you can see turned out really good, an is more than half full.Last edited by Roberts_Clif; 05-08-2024 at 07:39 AM.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help