Results 1 to 8 of 8
Hybrid View
-
04-22-2024, 03:57 PM #1
- Join Date
- May 2020
- Posts
- 627
Check nozzle temp in the slicer in case you have accidentaly changed to a lower setting.
Happened to me recently.
-
04-23-2024, 02:23 PM #2
- Join Date
- Apr 2024
- Posts
- 4
Nope, thats not it.
-
04-24-2024, 01:59 AM #3
- Join Date
- May 2020
- Posts
- 627
Possibilities......
Filament route to extruder not free enough.
Filament trapped under other windings on reel.
Teeth on extruder gunged up with filament particles.
-
04-28-2024, 02:50 AM #4
- Join Date
- Apr 2024
- Posts
- 4
The feeder motor is not trying to move during the print but when I purge it works 100% so there has to be something else
-
04-28-2024, 04:18 AM #5
- Join Date
- May 2020
- Posts
- 627
This is a guess......
Sounds like the G-code extrude command 'e' is missing in the start G-code.
When you reinstalled Cura did you copy the original start G-Code from whatever slicer came with the printer?
It'll be in the printer settings.
As I said...just a guess
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion