Results 1 to 6 of 6
Threaded View
-
03-31-2024, 10:20 AM #5
- Join Date
- Jun 2021
- Posts
- 5
I measured again the Z high (picture). I changed the nozzle and the tuba. It was the same print.
z_hight.jpg
I measured again the Z high (picture). I changed the nozzle and the tuba. It was the same print.
z_hight.jpg
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)