Results 1 to 10 of 10
Threaded View
-
03-27-2024, 04:19 AM #3
- Join Date
- Mar 2024
- Posts
- 8
After considering the details that I need to achieve with a printer, I ended up ordering Anycubic Photon Mono 2, wash and cure station, and water based resin, from Amazon. https://www.amazon.co.uk/ANYCUBIC-Pr...zcF9hdGY&psc=1
This was one of the cheapest, but reviews seemed to be good. I just hope that I havent compromised too much on quality for the price, and would appreciate your thoughts on this printer
Also, not sure if Ive bought the right resin, because I am seeing it is very brittle when cured, and I need my finished components to have "some" strength even though they are for functionality testing more than strength. The end components, once prototype testing is complete, will be made of a metallic material (ie steel) and need to be strong.. hope I am making sense? advice here very welcome! and maybe you can recommend a resin that would be strong but also give a small amount of flex?Last edited by legepe; 03-27-2024 at 04:53 AM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion