Results 1 to 2 of 2
Thread: Filament keeps breaking
Threaded View
-
02-27-2024, 09:03 AM #2
- Join Date
- May 2020
- Posts
- 626
If your filament is ground in half, check the fteeth on the extruder are not clogged up needing to much pressure on the filament.
Check for a clogged nozzle.
Try a different spool of filament to check if the problem is in the filament which might need drying.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion