Results 1 to 2 of 2
Thread: Filament keeps breaking
Threaded View
-
02-27-2024, 09:03 AM #2
- Join Date
- May 2020
- Posts
- 625
If your filament is ground in half, check the fteeth on the extruder are not clogged up needing to much pressure on the filament.
Check for a clogged nozzle.
Try a different spool of filament to check if the problem is in the filament which might need drying.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help