Results 1 to 2 of 2
Hybrid View
-
10-31-2023, 11:52 AM #1
- Join Date
- Feb 2023
- Posts
- 2
An update. I ordered a magnetic mount spring steel PEI build surface from Aliexpress. In the beginning the builds would not adher to the build plate as the 5th gen does not have a hot plate. After some forum reading I tried smearing glue stick on the plate and now there is good adhesion. No more blue tape! PVA glue stick is much more available and economical than blue tape.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion