Results 1 to 4 of 4
Threaded View
-
10-12-2023, 06:01 PM #3
- Join Date
- May 2018
- Posts
- 566
2 things;
PETG should need NO Cooling fan. Only time it is needed is if you are printing something tall and very thin.
If you place a hot end you need to run a PID on it so it will maintain the proper temp. This calibrates how the main board controls the power to the heater.
I can not tell you how to do it on your machine. Google your model and "Performing a PID calibrations "
Good luck
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help