Results 1 to 2 of 2
Thread: Filament not coming out
Threaded View
-
10-08-2023, 10:56 AM #2
- Join Date
- May 2020
- Posts
- 626
Sounds as if the extruder gear teeth could be clogged up from filament grinding.
A you tube search will probably give you some examples of that.
Also check that filament can be pulled from the reel as freely as possible.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)