Results 1 to 5 of 5
Thread: 3D Printing in Sculpey
-
07-28-2014, 11:48 AM #1
3D Printing in Sculpey
These were done with Sculpey Original, 2mm nozzle, .5mm layers:
Sorry about the focus. I've done some in greeen Sculpey III with a 1mm nozzle, I will bake them tonight and post images.
-
07-28-2014, 05:32 PM #2
Pics of the green Sculpey III prints printing; 1mm nozzle, .5mm layers:
-
07-29-2014, 07:22 AM #3
Here is one of the sculpey pieces (after baking) with a similar piece printed in ABS. The ABS plastic is done in .2mm layers, the sculpey in .5mm layers.
-
08-14-2023, 09:38 AM #4
I've just been notifeid that these image links are no good. I have uploaded these images to http://hyrel3d.com/images/sculpey.rar for anyone who wants to see them.
Here are a couple; the blue is ABS, the rest are Sculpey.
sculpey.abs.both.50.jpg sculpey.250mic.inprog2.jpg
-
08-14-2023, 09:51 AM #5
Yes, we have heads for DIW, Robocasting, DPE, HME, HME, FFF/FDM, lasering, machining, dynamic ratio blending, core-shell printing... we've even made one weld with. Ask me if you have a special need or combination of functions that other printers will not allow you to do. We can customize just about anything.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help