Results 1 to 2 of 2
Threaded View
-
05-22-2023, 05:47 AM #2
- Join Date
- May 2020
- Posts
- 625
Try 'Z' hop on layer change, just something to try, it might work.
There should also be a command in the slicer to avoid moving over printed parts.Last edited by Bikeracer2020; 05-24-2023 at 01:22 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help