Close



Results 1 to 2 of 2
  1. #1

    Hydrophobic coating for SLS polyamide 12 (Nylon 12) parts

    Hi guys!My name is Manuel Pinto and I´m a mechanical engineering student and I´m finishing my master's degree.I have parts printed through EOS powder (PA 12). Now I need a "waterproof" coating. I know that is possible to achieve it but there is no much information on internet about it...Can anyone help me?Greeting from Portugal!

  2. #2
    Student Tempus 3D Printing's Avatar
    Join Date
    Sep 2022
    Location
    Trail, British Columbia
    Posts
    13
    Add Tempus 3D Printing on Facebook
    Nylon 12 is pretty waterproof on it's own, but it can be finished in a number of ways, depending on how you will use it. We run a 3D printing business specializing in 3D printing Nylon 12 (www.tempus3d.com) and we have found that you can paint the parts yourself if they are not going to be used in a high-wear environment (for a cheap option). you can also send teh parts to a 3D printing service to have them vapor-fused (a chemical process that smooths and seals the outside) or fins a place that does a more industrial paint finish like Cerakote.

    Good luck with your project!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •