Results 1 to 3 of 3
Threaded View
-
10-13-2022, 12:50 PM #3
- Join Date
- Sep 2022
- Posts
- 5
After a lot of read I found solution adding G92 X10.3 E0 and G92 Y-10.3 E0 to start g-code in Cura.
After a lot of read I found solution adding G92 X10.3 E0 and G92 Y-10.3 E0 to start g-code in Cura.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion