Results 1 to 10 of 12
Threaded View
-
08-17-2022, 01:55 PM #2
- Join Date
- Aug 2022
- Posts
- 8
Sounds like the MAX6675 thermocouple amplifier chip is blown, probably from a short due to a frayed wire on the old thermocouple. I went through this very recently. I replaced the 8pin chip and was back up and running. If you are up for replacing surface mount chips I can show you what to do and where to get another chip cheap.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help